Petroleum Operations Practice Test

These questions are part of the practice quiz. Start practicing

• In a multi-stage separator, what is the purpose of a third stage?
• What is the calculation for determining required gallons of fuel?
• Which of the following is not typically determined by PVT analysis?
• What is the principle behind waterflooding as a secondary recovery method?
• Which company in the BSB provides vehicles and personnel for delivery of water and Class III(B) forward to FSCs and maneuver units?
• What is the role of glycol dehydration in gas processing?
• Flow assurance aims to prevent which issues in pipelines?
• What is the combined capacity of the two FSCs in the Armored BN within the BSB?
• In the described theater petroleum distribution framework, which organization provides area and direct class III (B) support to field elements?
• Which company within the BSB is tasked with delivering water and Class III(B) forward to FSCs and maneuver units?
• What is an oil-water emulsion, and how can it be destabilized for separation?
• What best describes the Petroleum Pipeline and Terminal Operating Company's role?
• Mud logging contributes to kick identification by monitoring which indicators?
• What is the maximum gallons per haul for the 7.5K POL Trans Company?
• What is the function of a blowout preventer (BOP) stack in drilling operations?
• What does flow assurance encompass in petroleum operations?
• Which of the following is not a listed single FSC capacity in the ABCT?
• Which statement is true about the listed FSC capacities?
• Which unit houses two FSCs that total 60,000 gallons in the ABCT?
• Which item designates M978?
• What is the mud weight window best described as?
• Hydrates in flow assurance are best described as which of the following?
• Which organization provides the Army with motor transport to move bulk fuel in the EAB?
• Which equipment is a 1000-1200 gallon capacity mobile fuel transporter?
• Who provides general supply, retrograde support, petroleum supply, water supply and shower and laundry services to supported units?
• Who would operate a petroleum laboratory?
• Which company receives, stores, and transfers bulk petroleum, providing wholesale and area support, and limited distribution in a theater of operations in support of brigade combat teams and echelons above brigade organizations?
• What is the QM CSC's daily capacity to store and issue Class III (B) fuel?
• How fast does the M1062 load and transfer fuel at?
• How many personnel are in the PQAS Team?
• Which statement about produced water treatment is true?
• Which statement best describes why perforations are made in a wellbore and what factors influence their placement and density?
• Among ABCT capacities, which amount is the smallest?
• Which pair of vehicle models is listed as equipment for the 5k POL Trans Company?
• Which designation corresponds to a Pump Rack Module?
• Who is responsible for execution of management of Class III (B) stock within the AO?
• Which sequence describes the steps in performing a decline curve analysis (DCA) for oil production forecasting?
• What is the 1000-1200 gallon capacity mobile fuel transporter?
• Where is the second sustainment load located within the ABCT?
• Which assets can interface with the Tactical Petroleum Terminal for fuel reception?
• Which option best lists the factors that influence choke size selection on a production tree?
• Which company in the Brigade Support Battalion conducts CL III(B) replenishment operations in support of their maneuver battalion?
• The PQAS Team is normally assigned to which unit?
• Which statement best describes the relationship between IRR and NPV when evaluating a project?
• Which item in the list is M978?
• Which size FSSPs have an additive injector?
• How many gallons can the PSC store per day?
• What operating measures prevent gas hydrates in gas-liquid pipelines?
• Which asset is a model designation for field fuel distribution equipment?
• Define water cut and its implications for production optimization.
• Which asset is the Fuel System Supply Point?
• What is the primary goal of waterflooding in secondary recovery?
• What is the primary fuel source for the ROM?
• HTARS stands for which system?
• What is a key benefit of incident reporting and investigation in the oil and gas industry?
• Which item designates FARE-2?
• What does Rs represent in PVT data, and how is it used in reserves estimation?
• What does the PQAS-E perform?
• What is the purpose of a cement bond log (CBL) in cementing operations?
• Which system functions as the modular pumping unit used during bulk fuel replenishment operations?
• How many personnel are in the Petroleum Liaison Team?
• How many vehicles can a ROM system provide refueling to?
• Who provides area and direct class III (B) support to the DSBs, BSBs, ASBs, and FSCs?
• Who provides direction for receiving, storing, and issuing theater class III (B) stock?
• Which refueling operation occurs when refueling an actual customer such as a M1 Abrams or M2 BFV?
• How does API gravity relate to oil quality and production handling?
• What is the bulk fuel delivery rate through the self-loading system for the M967?
• The Petroleum Pipeline and Terminal Operating Company is usually attached to which battalion?
• What kind of pump does the FARE-2 have?
• What is the issuing flow rate of the TPT?
• PQAS-E is the designation for which asset?
• What is the gallon capacity of the FSC BEB in ABCT?
• Explain the purpose of a PVT analysis in reservoir engineering.
• What is the purpose of regenerating lean amine in amine treating?
• What are the different size FSSPs?
• Which of the following best describes the purpose of a production tree choke sizing decision?
• Where are the three sustainment loads of fuel located within the ABCT?
• Which item is PRM?
• What is the bulk fuel delivery rate through the self-loading system for the M969?
• Which option is not a valid FSSP size?
• Which company operates the petroleum pipeline and terminal facilities for receipt, storage, issue, and distribution of bulk petroleum products in support of large-scale combat operations?
• What is a potential practical concern when using CO2 for miscible flooding?
• Why does oil viscosity impact surface separation and pump selection?
• What is the purpose of management of change (MOC) in petroleum operations?
• During a drill stem test, which description best defines its purpose?
• Which statement best describes why surfactants are used in enhanced oil recovery?
• Which item best describes a permit-to-work system?
• Which fleet asset is designated for wholesale bulk delivery on general highway roads?
• In theater logistics, which unit directly provides class III (B) stock support to field elements such as DSBs and FSCs?
• Which asset is the Tactical Petroleum Terminal?
• How many gallons does a M969 hold?
• What are the key considerations for CO2 miscible flooding?
• FSSP stands for?
• How is bottomhole pressure obtained and used in reservoir management?
• Which of the following are three common primary reservoir drive mechanisms?
• Which refueling operation occurs when dealing with more than 2375 gallons of fuel and generally conducted at EAB?
• What is the bulk fuel delivery rate through the pumping system for the M967?
• Which pairing is correct for ABCT units and capacities?
• Which item is a Fuel Drum?
• What is the primary purpose of produced water treatment in oil and gas operations?
• The TPT is located at which organization?
• How many personnel are required to operate a FSSP, regardless of size?
• What is the dew point in natural gas processing and why is it important?
• Which statement best describes Layer of Protection Analysis (LOPA) in petroleum operations?
• What equipment is used for wholesale bulk delivery only on general highway roads?
• What is the primary purpose of surge handling and slug control in pipelines experiencing slug flow?
• For aerial fuel delivery, which packaging option is used?
• What is the primary effect of surfactants in oil-water systems relevant to enhanced oil recovery?
• The PSC's combined daily receiving/issuing capacity and daily storage capacity totals approximately how many gallons?
• What challenges are associated with subsea production systems?
• Which battalion is described as providing command for three to five companies and overseeing petroleum distribution components including pipelines and terminals?
• Which asset is the Assault Hoseline System?
• How does polymer flooding improve oil recovery compared with simple waterflooding?
• In polymer flooding, what is the primary mechanism that improves sweep efficiency?
• Which team is specialized in petroleum quality analysis and laboratory operations for petroleum products?
• Relative permeability is crucial because it affects which reservoir behaviors?
• Which facility has the role to receive, store, and issue fuels to and from ships, barges, pipelines, rail cars, hose lines, and tank trucks?
• Which system is commonly used for bulk petroleum distribution from depots to forward echelons?
• Which statement best describes how surfactants affect interfacial tension and oil mobilization in EOR?
• Which item corresponds to M969?
• Where is the first sustainment load located within the ABCT?
• What is relative permeability and why is it critical in reservoir performance prediction?
• Which statement correctly describes the primary function of the AHS in the described operations?
• What is the primary purpose of the Inland Petroleum Distribution System (IPDS)?
• What measures help mitigate cathodic protection (CP) failure in pipelines?
• The M967 has a pumping system rate of 600 GPM and a self-loading rate of 300 GPM. Which statement is true?
• What does IPDS stand for?
• Which statement correctly describes FSSP injector capability?
• How many total gallons of fuel is found within the ABCT?
• The Armored BN has two FSCs in the BSB totaling 60,000 gallons. What is the capacity of a single Armored BN FSC?
• What is the storage capability of the M978?
• What is connate water and how does it affect well performance?
• What equipment is used for bulk delivery support over primary and secondary roads?
• Distinguish between a three-phase separator and a mist eliminator in gas-liquid separation.
• Describe the function of a two-phase surface separator in oil production facilities.
• Which item is ROM?
• What two categories is class III divided into?
• IPDS stands for which system?
• Does the M1062 have fuel servicing capabilities?
• Who executes management of Class III (B) stock within the AO?
• During a drill stem test, what is isolated and produced to evaluate reservoir performance?
• Which section of the SPO staff provides technical expertise on supply and distribution of petroleum and water, reviews bulk fuel forecasts, and manages BCT fuel stocks?
• Kick detection and control in drilling relies on which indicators and response?
• Why is water removal from natural gas critical before transmission?
• What is used for aerial fuel delivery?
• What is the gallon capacity of the distribution company in ABCT?
• Which unit is used to express the TPT issuing flow rate?
• What role does Rs play in gas-oil systems?
• What is the PQAS?
• In kick prevention and control, what is the first action typically taken when a kick is detected?
• Which statement correctly describes the Tactical Petroleum Terminal's ability to receive fuels from multiple modes?
• What trucks does the 7.5k POL Trans Company have?
• What is gravel packing and in what situations is it used?
• Which equipment does the 5k POL Trans Company have?
• Explain the concept of production allocation in oil operations.
• What is the gallon capacity of the FSC in the FA BN?
• Which is the smallest single FSC capacity described?
• How many containerized systems does a Tactical Petroleum Terminal have?
• Which of the following is not a single FSC capacity in the ABCT?
• What provides the pumping capability for Tank Ranks in fuel farms or ROM operations?
• Which condition is primarily mitigated by glycol dehydration and amine treating?
• Why is cementing of casing strings important in well integrity?
• The PSB is usually attached to which unit?
• What is the function of the drill string and drill collars in drilling operations?
• What is the bulk fuel delivery rate through the pumping system for the M969?
• What is the role of the capillary number in CO2 miscible flooding?
• What is the GPM on a PRM?
• Which abbreviation refers to Tank Pump Unit?
• Who provides liaison service between supported units, host nation petroleum activities, DLA, and the petroleum requirements branch of the QM Group?
• What does FARE-2 stand for?
• What is the Tactical Petroleum Terminal?
• Does the M967 have fuel servicing capabilities?
• Which model holds 5,000 gallons?
• How many gallons of fuel can the 5k POL Trans Company move per haul?
• The military petroleum distribution system may include up to how many miles of pipelines?
• Which organization is primarily responsible for shower and laundry services to supported units?
• Which battalion provides mission command for three to five companies, a combination of Petroleum Support companies, Transportation Medium Truck companies (petroleum), and Petroleum Pipeline and Terminal Operating companies for the operation and maintenance of a military petroleum distribution system consisting of up to 375 miles of petroleum pipelines, related terminal facilities, and the transportation of class III (B)?
• What is the function of a tubing/casings packer in production operations?
• In a decline curve analysis, which step comes after selecting a decline model?
• Which team would you consult for quality analysis of petroleum products in support operations?
• What does TPT stand for in petroleum logistics?
• M967 is the designation for which asset?
• Which equipment is used to transfer large quantities of fuel between temporary bulk storage sites at distances up to 2.5 miles?
• What are the two kinds of refueling operations?
• How many sustainment loads exist within the ABCT?
• How many total vehicles (M915 trucks plus M1062 tankers) does the 7.5K POL Trans Company have?
• How many gallons can the PSC receive and issue per day?
• Who coordinates refueling site and quantity in the FSC?
• Which system is the Assault Hoseline System abbreviated as?
• In an oil-water emulsion, what is the primary role of heat and agitation in separation?
• Which statement best defines net present value (NPV) and its use in project evaluation?
• Which statement is true about the M1062?
• What is the flow rate of an Inland Petroleum Distribution System (IPDS)?
• M1062 is the designation for which asset?
• The FSC capacities described (MIB 30,000; Armored BN two FSCs totaling 60,000; FA BN 15,000) sum to how many gallons?
• What is gas lift and when is it employed in production?
• What is the gallon capacity of the FSC Cavalry Squadron in ABCT?
• What is slug flow in a pipeline and what issues can it cause?
• What is the main purpose of incident reporting and investigation in petroleum operations?
• If IPDS runs at 600 GPM for 20 hours, what is the total daily flow in gallons?
• Which vehicle has a fuel storage capacity of 2500 gallons?
• How does amine treating remove acid gases from natural gas?
• Among ABCT capacities, which is the largest?
• Which is the largest single FSC capacity described?
• Which statement correctly describes the composition of the PQAS Team?
• In project evaluation, how is internal rate of return (IRR) used in relation to NPV?
• The Petroleum Liaison Team is usually assigned to which unit?
• What is the primary purpose of a custody transfer measurement system in pipeline operations?
• Define the mud weight window and its significance in drilling safety.
• What is the primary purpose of artificial lift in oil production?
• Higher API gravity crude oil is generally characterized as which option?
• What is the receiving flow rate of the Tactical Petroleum Terminal?
• HTARS is an aviation refueling system designed for which platform?
• Which size FSSP does not have an additive injector?
• How many gallons can the 7.5 POL Trans Company move per haul?
• Class III is packaged when the quantity is less than how many gallons?
• How many gallons can the PSC distribute per day?
• What does AHS stand for?
• The bulk classification threshold for Class III is more than how many gallons?
• QM CSC stores and issues Class III (B) fuel per day up to how many gallons?
• FSSP stands for which asset?
• Up to what distance can the AHS transfer fuel between temporary bulk storage sites?
• Which downstream device is specifically used to remove liquid droplets from gas after separation?
• What is the storage capacity of the Tactical Petroleum Terminal (TPT)?
• How many fuel property tests are conducted at the PQAS-E?